Zydus Cadila Biotech Executive Vaccine QC Jobs – Rs. 6 Lakh PA Package

Zydus Cadila Biotech Executive Vaccine QC Jobs – Rs. 6 Lakh PA Package

Position: Officer / Executive (Vaccine QC)

Experience: 02 to 04 Yrs.

Qualification: B.Sc. / M.Sc. (Biotechnology)

Location: Moraiya

Salary: INR 2,00,000 – 6,00,000 PA.

Job Responsibilities:

• To do all of the IPQC tests according to the production plan.
• To perform the SRD test, BET test, Virus titration test, Safety test in cell culture, Sterility test, Other extraneous agents in cell culture, avian viruses test in eggs and other IPQC test and maintain the records for the same.
• To assess timely calibration and validation of all of the critical equipment associated with IPQC.
• To prepare the sterility medium, agar plates and other solution necessary to carry out IPQC test.
• To perform all of the stability studies and prepared the validation protocol related to IPQC checks of focus and finish products.
• To keep the stock of all of the items like reference criteria, antiserum and NIBSC standard and the other materials associated with IPQC test.
• To monitor all the parameter of all the equipment present in IPQC laboratory.
• To observe all sterility checks of production samples.
• To perform all the environmental monitoring of the production area and take care of the record.

How to Apply:

E-mail identification of the person to whom CV to be sent: Dwijesh.Pandya@zyduscadila.com.

WALK IN INTERVIEW on 14 SEP 2019 (MACLEODS PHARMA LTD)

MACLEODS PHARMA LTD

WALK IN INTERVIEW at R&D Centre - Andheri (E) Mumbai On Saturday, 14th SEPTEMBER 2019.

Vacancies for API and Formulation Analytical Method Validation at R&D Center.

KINDLY NOTE: VACANCIES ARE NOT FOR FRESHERS

Vacancy : Research Associate/ Research Scientist
Section : API HPLC Validation
Qualifi: M.SC/ M.Pharm
Analyst Exp: 2-6 years
Reviewer Exp: 4-8 years
Skillset : Experience in APIs handling Instruments like HPLC.

Vacancy : Research Associate/ Research Scientist
Section : Formulation HPLC Validation
Qualifi: M.SC/ M. Pharm
Analyst Exp: 2-6 years
Reviewer Exp: 4-8 years
Skillset : Exp in Finished products handling Instruments like HPLC.

Please WALK IN along with CV and CTC proof on following Date & Place
Saturday, 14th SEPTEMBER 2019 between 09:30 am to 04:00 pm

G-2, Saket Building, Near Onida House,
Mahakali Caves Road, Shanti Nagar,
Andheri (East), Mumbai - 400 093.
Landmark : Near Onida House

darshanc@macleodspharma.com / aishwaryab@macleodspharma.com
In case of any query, please revert on 08657428562/ 09867023946/ 8291054728/ 08657392919

Pharma Vacancy

Shilpa Medicare Ltd-Walk-In Interview for Production /QC/ QA /Engineering (75 Positions) On 21st July 2019

How to Prepared and Standardize of 0.1 N Ceric Ammonium Sulphate Volumetric Solution.

How to Prepared and Standardize of 0.1 N Ceric Ammonium Sulphate Volumetric Solution.

                                                             

                                                                 

Preparation of 0.1 Ceric Ammonium Sulphate Volumetric solution

➤ Glass ware and instruments required.

Beaker, Glass stirrer, Graduated Pipettes, Graduated cylinder, Analytical balance, Sucker, Volumetric flask, Burette, Conical Flask, Fume hood.

➤ Reagents required.

Ceric Ammonium Sulphate Reagent Grade,

Mol. Wt. :- (2NH₄)2SO₄,Ce(SO₄)₂,2H₂O,   632.6

Sulphuric Acid AR/GR grade,

Arsenic Trioxide PS (Previously dried for 1 hr. at 105°,

Sodim Hydroxide 8% w/v,

Sulphuric Acid Dilute,

Osmic Acid Solution,

Ferroin Sulphate Solution.

➤ Preparation.

Weigh 65 g ceric ammonium sulphate reagent grade in 1000 ml volumetric flask. Dissolve in a mixture of 30ml sulphuric acid AR/GR grade  and 500ml of water  with the aid of gentle heat. Cool it to room temperature  and dilute up to the mark with water.

➤ Standardization. 

Accurately weigh about 0.2 g arsenic trioxide  PS,  previously dried for 1 hour at 105°, in  to a 500ml conical flask. Wash down the inner walls of the flask with 25 ml of 8%w/v solution of sodium hydroxide, swirl to dissolve, add 100ml of water and mix. Add 30 ml  of dilute sulphuric acid, 0.15 ml  of osmic acid  solution, 0.1 ml  of ferroin sulphate solution, and titrate with ceric ammonium sulphate solution until  the pink colour  of the solution changes sharply to pale blue colour.

➤ Calculations.

                                   g  AS₂O₃  x  0.1

N / M  = --------------------------------------------------

                          0.004946  x   Burette reading in ml 

  

How to prepared and standardised of 0.1 N Ferrous Ammonium Sulfate volumetric solution.

How to Prepared and Standardize of 0.1 N Ferrous Ammonium Sulfate volumetric Solution 

                                                      

Preparation of 0.1 Ferrous Ammonium Sulfate Volumetric solution

➤ Glass ware and instruments required.

Beaker, Glass stirrer, Graduated Pipettes, Graduated cylinder, Analytical balance, Sucker, Volumetric flask, Burette, Conical Flask, Fume hood.

➤ Reagents required.

Ferrous Ammonium sulfate Reagent Grade,

Molecular Wt. :- Fe(NH₄)₂(SO₄)₂, 6H₂O,  392.14,

Potassium dichromate,

Sulphuric Acid.

Ferroin Solution

➤ Preparation.

Weigh about 39 g ferrous ammonium sulfate reagent grade into 1000 ml volumetric flask containing about 400 ml water. Add 20 ml of conc. sulfuric and and make up to the mark.

➤ Standardization.

Pipette out 10 ml std Potassium dichromate (K₂Cr₂O_7). Acidify by adding 10 ml Sulphuric Acid (H₂SO₄₎ and titrate with Ferrous Ammonium Sulfate by adding 2 to 4 drops of ferroin solution as an indicator. End point is yellow to reddish black.

➤ Calculations.

                      Volume of K₂Cr₂O₇ solution, ml    x  0.2500

N / M= ----------------------------------------------------------------------

               Volume FAS used in titration  [Burette reading in ml ]

How to prepare and Standardize 0.1 N Sodium Thiosulphate volumetric Solution.

How to prepare and Standardize 0.1 N Sodium Thiosulphate volumetric Solution.

                                                              

                                                                     

Preparation of 0.1 N Sodium Thiosulphate volumetric solution.

➤ Glass ware and instruments required.

Beaker, Glass stirrer, Graduated Pipettes, Graduated cylinder, Analytical balance, Sucker, Volumetric flask, Conical flask, Burette, Fume hood.

➤ Reagents required.

Sodium Thiosulphate 

Molecular Wt. :- Na2S2O3,5H2O, 248.19

Potassium Bromate PS

Sodium Carbonate Reagent grade

Starch Indicator 

 ➤ Preparation.

Weigh accurately about 26 g sodium thiosulphate reagent grade and 0.2 g sodium carbonate reagent  grade in 1000 ml volumetric flask. Dissolve and dilute with recently boiled and cooled water. Filter the solution, if it is not clear.

➤ Standardisation.

Accurately weigh about 0.2 g Potassium Bromate PS into 250 ml volumetric flask. Dissolve and makeup the volume with recently boil and cooled water. Pipette out 50 ml of above solution into 250 ml conical flask. To this add 2 g potassium iodide reagent grade and 3 ml of 2 N Hydrochloric acid and slowly titrate with 0.1 N / 0.1 M Sodium Thiosulphate solution using starch solution as an indicator, which is added towards the end of the titration, until the blue colour is discharged. Note this final end point as burette reading in ml. 

➤ Calculations.

                                      g  KBrO₃  x  0.1 x 50

N / M = --------------------------------------------------------------

                           0.002784  x   Burette reading in ml x 250

How to prepare and Standardize 0.05 N Sulphuric acid volumetric Solution

How to prepare and Standardize 0.05 N Sulphuric acid volumetric Solution

                                                 

                                                      

Preparation of 0.05 N Sulphuric acid volumetric solution.

➤ Glass ware and instruments required.

Beaker, Glass stirrer, Graduated Pipettes, Graduated cylinder, Analytical balance, Sucker, Volumetric flask, Burette, Conical Flask, Fume hood.

➤ Reagents required.

Sulphuric acid.
Molecular wt H2SO4 , 98.08
Sodium carbonate primary standard. (Previously dried for 1 hour at 270°C - 300°C)
Methyl red indicator.

 ➤ Preparation.

Transfer slowly with stirring, 0.3 ml of sulphuric acid reagent grade to 1000 ml volumetric flask containing 100 ml water, cool and dilute up to the mark with same solvent.

➤ Standardisation.

Accurately weigh about 0.015 g sodium carbonate PS, previously dried for 1 hour at 270° - 300°, in 250 ml conical flask. Dissolve in 100 ml water. Add 2 drops of methyl red indicator solution. Titrate with 0.01 N / 0.005 M sulphuric acid till the solution becomes faint pink. Heat the solution to boiling, cool to room temperature by holding the flask under tap water. Continue titration to faint pink colour. Repeat the steps of heating and cooling till faint pink colour is restored. 

➤ Calculations.

                            Wt. of  Na2CO3  × 0.05  
Normality = --------------------------------------------
                         0.0005299 × Burette reading in mL